Details
The PT-RZ470 projector features enhanced installation flexibility and various projection capabilities. Multiple portrait images bring about a strong impact. Lining up several portrait projection screens vertically, with the edge blended, creates a single, long screen. And 3D projection using active shutter glasses is also possible. Features such as these enable fresh visual expression in places like museums, public spaces, and company showrooms.
Features
The LED/laser-combined light source enables long time of continuous operation
This light source requires no maintenance for long time. In many cases, this means no maintenance until your next refresh cycle. Naturally, there are no lamp burn-out problems during use, so reliability is further increased. There is also no filter to clean due to carefully engineered sealed optics. As a consequence, running cost is dramatically lowered because of the savings on lamp costs, maintenance labor and hassle of stocking lamps.
Bright, beautiful picture quality for a long period of time
The PT-RZ470 features 3,500 lumens of brightness. Rate of brightness deterioration in the LED/Laser-combined light source is extremely slow compared to lamp-based projectors. The solid shine drive uses a built-in sensor to constantly detect the light intensity of the light source and correct corresponding changes in white balance. This all helps to maintain excellent picture quality for a long period of time. Contrast is outstanding too, at 20,000:1, and images are reproduced with a wide dynamic range. The PT-RZ470 features a Full-HD DLP chip, allowing highly detailed Full-HD images without resizing.
Superior color reproduction
The LED/Laser-combined light source has a higher level of color purity than an ordinary lamp, allowing it to achieve color reproduction with wider color space. Colors are more vibrant than those of conventional projectors.
Dust-resistant structure with an airtight optical block
The area between the LED/Laser to the DLP chip and prism is hermetically sealed to form an airtight structure for the optical block, the heart of the projector. This resists the effects of dust and other particles in the air, and enables use of the projector in a wide range of environments.
Flexible 360-degree installation
The projectors can be rotated vertically. This means you can install one at any up-and-down angle you want, to accommodate different installation conditions.
Portrait mode capability
Portrait mode allows the projector to be mounted with its side surface facing down, for projecting onto a long, vertical screen. This provides a fresh visual effect in museums, public spaces, shopping centers, company showrooms, and similar locations.
Additional Information
| Aspect Ratio | 16:9 |
|---|---|
| Contrast Ratio | 20,000:1 |
| Throw Ratio | 1.46 - 2.94:1 |
| Lamp Life | Medium Brightness: 20,000 Hours |
| Lens Shift | Vertical: -48 to 73%, Horizontal: -35 to 27% |
| Throw Distance | 4.265 - 64.304' / 1.3 - 19.6 m |
| Operating Temperature | 32 to 113°F (0 to 45°C) |
| Brightness | 3500 Lumens |
| Keystone Correction | Yes |
| Lens | f/2 - 3.4 (f = 21.5 - 43mm) |
| Uniformity | 90% |
| Ceiling Mountable | Yes |
| Rear Screen Projection | Yes |
| Projection Size | 40 - 300" / 101.60 - 762.00 cm |
| Display System | 1-Chip .65 DLP |
| Ground (Ships Within 24-48 Business Hours and will arrive within 7-10 Business Days) | $0 | |
| 3-Day (Ships Within 24-48 Business Hours and will arrive within 3-5 Business Days): | $149 | |
| 2-Day Air (Ships Within 24 Business Hours and will arrive within 2-3 Business Days) | $249 | |
| Overnight (Ships Within 24 Business Hours and will arrive within 1-2 Business Days): | $349 |
