Details
The MW853UST 3200-Lumen WXGA Ultra-Short Throw DLP Projector from BenQ features a 0.43:1 throw ratio, which is ideal for classroom and other applications where the projector is to be mounted very close to the screen • single lamp provides 3200 ANSI lumens brightness in Normal Mode, and a single-chip DLP imaging device renders a 1280 x 800 (WXGA) resolution, 16:10 aspect ratio image • Through scaling the projector can also support a range of non-native resolutions, up to Full HD (1920 x 1080) for video and UXGA (1600 x 1200) for computer sources • Through a special USB type port the BEMW853USTcan interface with the PointWrite interactive learning system, the hardware for which is available separately • With a 0.43:1 throw ratio it is possible to render a 80"-wide (100"-diagonal) image with the projector mounted 34" away from the screen • By wall mounting at such a close distance the risk of shadow interference and potentially dazzling specular reflections is greatly reduced • Turn any surface into an interactive whiteboard that you can draw on with PointWrite pens or just your fingers • Seamlessly merge the image from two projectors to create an extra large virtual workspace • Up to four fingers/pens can be used at once • For faster setup, auto calibration takes as litter as one second (depending on your computer) • Up to 0.016-second response time when writing • single lamp provides 3000 lumens of brightness in Normal mode, and is estimated to last 4000 hours (up to 7000 hours in the lower brightness SmartEco Mode) • This projector features a 16:10 native aspect ratio • By detecting the input content to determine the amount of brightness required for optimum color and contrast performance, the SmartEco Mode is designed to reduce lamp power while maintaining consistent image quality • Allows teachers or presenters to blank the projection screen whenever they need to direct focus back on them and not the image - or simply to save power when the projector is not in use • Features DLP technology to support 3D functionality, allowing you to bring an immersive learning experience to students with a simple preparation of separately available 3D glasses and 3D content • Enables up to six-color processing by incorporating the secondary colors Yellow, Cyan, and Magenta along with primary Red, Blue, and Green to help provide more accurate color reproduction • An RS-232 port means the projector can be controlled from a computer running custom software or via automation system such as Crestron • USB 2.0 type B female for connecting to a computer to install firmware update • fan-based cooling system ensures the lamp stays within a safe operation temperature range • The wall mount features an installation chart and a measuring ruler to help you find the most suitable projector-screen alignment and image position for your classroom • Picture Modes: Dynamic, Presentation sRGB, Cinema 3D, User 1, User 2
