Details
Hitachi's first 1-chip DLP laser light source projector delivering larger-than-life performance with high brightness and low total cost of ownership.
DICOM® Simulation Mode: The DICOM (Digital Imaging and Communications in Medicine) Simulation Mode projects grayscale images which approximate DICOM Part 14 specifications. This mode is ideal for viewing grayscale medical images, such as X-rays, for training and educational purposes. The projectors have a DICOM (Digital Imaging and Communications in Medicine) Simulation Mode. This mode simulates the DICOM standard, which is a standard applicable to digital communications in medicine, and is useful for displaying medical images such as X-rays. These projectors are not medical devices and are not compliant with the DICOM standard, and neither the projector nor the DICOM Simulation Mode should be used for medical diagnosis. Comparison photos are simulations.
Dust Resistant Sealed Engine: The air tight structure of the optical engine makes it possible to minimize dust particles entering which could eventually lead to a decrease in brightness. This construction gives the projector resistance to the effects of dust and enables the projector to be used in a wide variety of environments.
Edge Blending: Projectors are equipped with the Edge Blending function that achieves the seamless projection of one image using multiple projectors. Instant blending: Easily perform blending processing without the use of any special equipment.
Maintenance Free Operation: Approximately 20,000 hours of maintenance free operation. There is no need to replace a lamp or air filter, providing a dramatic reduction in the total cost of ownership and time spent changing bulbs.
Motorized Zoom, Focus and Lens Shift Control: Allows for greater range of installation possibilities. With the motorized function you can make fine adjustments through the remote control or RS232/IP device.
New Phosphor Wheel: A new heat-resistant material is used in the phosphor wheel to withstand the high output from the laser light source.
Perfect Fit: Enables the user to adjust individual corners independent of one another. This feature helps correct geometric and complicated distortions. Perfect Fit allows the projected image to fit correctly to the screen quickly and easily.
Picture By Picture: Enables the content from two input sources to be displayed simultaneously, side by side on one screen. You can use two sources including 2 HDMI, with both images sharing equal screen size. The feature is ideal for teleconferencing applications.
Picture In Picture: Enables you to display one image inside another image using two sources including 2 HDMI.
Quad Laser Bank System: Quad-Drive Optical engine comprises four module grouping laser diodes into independent light sources. The use of four separate laser modules means that in the unlikely event of one light source failing, projection continues with no perceivable drop in brightness.
Warping: Images can be geometrically corrected for Rotation, Keystone, Pincushion or Barrel and 4-corner imperfections.
360º Rotation/Portrait Projection: Display rotation of 360º and portrait projection for creative applications and greater installation flexibility.
3D system by DLP Link: A special 3D emitter is no longer needed for 3D viewing.
Additional Information
| Aspect Ratio | Native 16:10 and 4:3 / 16:9 compatible |
|---|---|
| Brightness (ANSI Lumens) | 8,000 Lumens |
| Contrast Ratio | 20000 : 1 (using active IRIS) |
| Display Type | DLP (1) |
| Control | D-sub 9-pin connector x 1 |
| Power Supply | 110-120V AC 10.2A / 220-240V AC 5.6A |
| Power Consumption | 110-120V AC 885W / 220-240V AC 845W |
| Lamp Type | Laser Phosphor |
| Lamp Life | Approx 20,000 hours |
| Lens Shift | Horz & Vert |
| Operating Temperature | Normal mode: 0-35°C / Eco mode: 0-40°C |
| Resolution | WUXGA (1920 x 1200) |
| Screen Size | 50"~600" (FL-920: 100"~350") |
| Brightness | 8000 ANSI Lumens (Normal) 5400 ANSI Lumens (Eco Mode) |
| Operating Humidity | 0-80% RH (non-condensing) |
| Keystone Correction | H: +/-60° and V: +/-40° |
| Power Requirements | 110-120V AC 10.2A / 220-240V AC 5.6A |
| Fan Noise | 40dB (Normal Mode) / 37dB (Eco Mode |
| Display System | 1-chip DLP® |
| Ground (Ships Within 24-48 Business Hours and will arrive within 7-10 Business Days) | $0 | |
| 3-Day (Ships Within 24-48 Business Hours and will arrive within 3-5 Business Days): | $99.99 | |
| 2-Day Air (Ships Within 24 Business Hours and will arrive within 2-3 Business Days) | $199.99 | |
| Overnight (Ships Within 24 Business Hours and will arrive within 1-2 Business Days): | $299.99 |
