Details
Enjoy bright images in most everyday settings with the Panasonic PT-FX500U 5000-Lumen XGA LCD Projector. Its 5000 lumens of brightness combined and 10,000:1 dynamic contrast ratio will work together to overcome light in moderately bright rooms and provide detail in dark areas of the image • It sports a 1024 x 768 XGA native resolution for viewing detailed video, pictures, or data • The projector's 1.32 to 2.44:1 throw ratio will allow you to place it near the back of the room with no loss of focus • The PT-FX500U features two HDMI, two VGA, and a composite video input to connect to nearly any device • One of the VGA inputs also functions as an output for daisy chaining other projectors or displays with the same video source • Its analog audio input and output and built-in 10W speaker will ensure that audio accompanies your video • It is controllable via the included remote control, by Ethernet, or RS-232 with PJLink, Crestron, or AMX software • The PT-FX500U features 5000 lumens of brightness to produce bright and clear images even with the lights on. Documents with text and graphics are easy to read, while still images and video are reproduced with colorful vibrancy • High dynamic contrast ratio of 10,000:1 is enabled by an iris mechanism, so that white appears white and black appears black—not dark gray—with minimal loss in detail for clear images • PT-FX500U features a native resolution of 1024 x 768 (XGA) for clear, detailed images • Panasonic's Daylight View Basic uses a built-in sensor to measure ambient light and calibrate image projection appropriately, optimizing brightness and halftone color and sharpening details to produce easy-to-see pictures in well-lit rooms • The PT-FX500U offers a DICOM Simulation Mode that allows the projector to simulate the results of devices compliant with the Digital Imaging and Communications in Medicine (DICOM) Part 14 standardized display function, for display of grayscale images • The PT-FX500U extends lamp replacement to 8000 hours with lamp power set to Eco, or 6000 hours with lamp power set to Normal, reducing operating costs, labor, and environmental impact • The PT-FX500U protects against dust intrusion with a one-way airflow path and improved sealing for the lens block, air intake duct, and dual-layer Eco Filter • A variety of Eco Management functions are accessible via a button on the remote control. These include brightness optimization for ambient light conditions, and lamp power reduction when no input signal is detected • To reduce hassle, the filter can be replaced via the side, and the lamp from the top of the projector. There's no need to remove the unit from its ceiling mount for periodic maintenance • The quiet design reduces operating noise to just 29 dB, with the sound of the cooling fan hardly noticeable. This helps to keep the audience focused on the presentation • The inclusion of a 1.8x zoom and joystick-operated wide-range lens shift grants flexibility for installation in different rooms and for projection on different screen sizes • With the optional DIGITAL LINK Switcher, you can receive wired video signals (up to 1080p resolution) from up to 492' away in Long Reach Mode • Horizontal, vertical, and corner keystone correction adjusts the image shape for clear visibility when projecting off-axis or from an unusual angle • A symmetrical lens-centered design reduces installation complexity and makes the PT-FX500U easier to adapt to a wider range of installation sites • Project Wirelessly with Optional Module • With support for PJLink Class 1, Crestron Connected, AMX, and RS-232C over wired LAN, any legacy unit can be swapped out for a PT-FX500U projector without disrupting existing control and management infrastructure • This software lets you control and monitor multiple projectors/displays at the same time over wired LAN. If a problem occurs, an alert is sent to the monitoring/controlling computer • Optional Early Warning Software ET-SWA100 Series • Connect nearly any source device to the PT-FX500U via its array of terminals, including HDMI and DIGITAL LINK • Power-saving Eco Standby Mode draws just 0.5 W of power in Standby Eco Mode