- Monitor out
The VPL-FE40 projector can display the image simultaneously on a large screen and on an additional monitor (via a 15-pin D Sub connection), so that the user can face the audience and still see the information being shown.
- Low fan noise
For an undisturbed presentation, quiet operation is very important. The noise level of the VPL-FE40 is 28dB in low mode which is considered less than a whisper.
- Password protection
When this function is activated a password is required to use the projector.
- Control panel lock
This function locks the controls on the top and side of the projector, to prevent unauthorized or unintentional use of the controls. Functionality can be switched "on" or "off".
- Off and go
No cool down time needed, just switch off and pack away! The fan continues to cool the VPL-FE40 after the power supply is removed, enabling users to unplug the projector immediately after use, without damaging the lamp or optics. Other projectors need to remain connected to the power supply to cool the projector after use.
- Direct on/off
Ceiling mounted projectors notoriously remain on after the meeting concludes and the attendees leave the room which in turn burns unnecessary hours on the lamp and electricity. The VPL-FE40 can be set to skip the standby mode, so that it can be turned on/off directly using a main switch.
- ID function for multi-projector installation
Multiple projectors, one remote commander! VPL-FE40 projectors have a built-in ID function, so each projector can be controlled independently from a single remote commander unit.
- Eco info
Halogenated flame retardants are not used in cabinets or printed wiring boards.
